Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 19.06.2025 08:43

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

He then describes Rainy Season and Lightning.

so, what happens?

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

How does a single-payer healthcare system handle costs for surgeries, and what's the patient experience like compared to private insurance?

He then describes the function of a fuse.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

This is where the MOV conducts again, and dissipated the energy.

Man Sits On and Breaks Crystal-Encrusted ‘Van Gogh’ Chair in Italian Museum Before Fleeing - ARTnews.com

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

This one hit behind the barn.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Can women learn to squirt?

First Sentence:

There are three different concepts here that are getting confused.

Edit 2024–10.

What is your best gay fantasy?

One

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

But it can get overloaded, and no longer works.

Why can't flat-Earthers create an agency like NASA to explore Earth to prove it is flat? What's preventing them from doing so?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Upvotes:

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

What happens in Sweden if you cannot pay a hospital debt you did not know about until recently but willing to pay when your finances improve?

This is 'the assistant's answer'

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–16 [ OO OLAOYE OYEBODE ]

Diddy Trial's Most Disturbing Claims: Week Six Breakdown - TooFab

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

One is “what exactly is in a ‘surge protector’ ? ”

How can I get over a break up?

It seems Mohan does not understand the difference between a comment and an Answer.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

I'm very sick. 72 years old. I thinking I'm losing my mind. My dead friend told me it's going to be okay. I could feel him. There is more…I don't know what but more.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

(Dc diagram shown, AC is similar).

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Do you like Melania Trump's new official 1st lady black & white power portrait?

It also is a device that limits the change in current flow.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

These devices are installed between the “hot” and “neutral” and protective ground.

Because the load is inductive, the current lags the voltage.(by a bit).

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

nine

At least they know the answer if they wanted it.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

The bolt then partially travels down the line to your home.

the problem then depends on "how fast does the fuse operate?".

These are simplified answers to the original question, and does not change anything I wrote above.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

I post the exact comment here.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

At one ohm, the resistor has a maximum of 1 watt power.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

He then asserts :

[old diagram got deleted by accident]

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This device then solves the entire problem.

what exactly is a ‘surge’ protector?

The third is lightning and “how it gets conducted into a home.”

eight

Here is a simplified AC power diagram.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

But… the neutral is now “floating” because of the 1 ohm resistance.

What is lightning?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

A fuse is a non-resetable over current circuit protector.

[image of Common-mode choke]

An AC voltage/ current source, and an ac inductive load.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

There are two important concepts here.

The other is “what does a “fuse” do?”

In schematic diagrams this is the symbol for a fuse:

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What does a fuse do?

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

A circuit breaker is similar, but is resettable.

Now when you have a certain ac resistance, then a current flows in a loop.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

2024–10–10[John johnson John Johnson ]

This is where this question deviates from being a 'generic' question, and becomes more specific.

Barnstars:

For this case there are devices called Metal oxide varistors (MOV).

2024–10–14 [Omar Gharbi Omar Gharbi ]

but this device (an Inductor) … impedes the rapid changes in the current.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

So, the voltage could go up to 500 volts, and the fuse will not open up.

a photo is worth a thousand words.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

but I think this circuit , shows a few more pieces.